Full-Service Roofing | Seattle, WA
Seattle Roofing & Maintenance handles every roofing job from a single-shingle repair to a full commercial re-roof. Here's what we do in Seattle.
Roof Replacement
Your roof replacement includes a full-system install: ice and water shield at eaves, valleys, and penetrations; synthetic underlayment across the entire deck; aluminum drip edge at rake and eave; starter strip with sealant; architectural shingles with 130+ mph wind rating; and continuous ridge vent for proper attic ventilation. We also install new pipe boots and vent flashing on every penetration.
Get a Free Quote →Roof Repair
We warranty every repair for 5 years. If the same area leaks again due to our workmanship, we come back free. That warranty is in writing and it means something because we're a local Seattle company. We're not disappearing.
Get a Free Quote →Storm Damage Repair
We handle storm damage claims from start to finish: inspection, documentation, claim filing, adjuster meeting, supplement if needed, repair or replacement, and final inspection. Our supplement team has recovered thousands in additional coverage for Seattle homeowners that adjusters initially missed.
Get a Free Quote →New Roof Installation
We install new roofs on new homes, additions, detached garages, carports, and covered patios. Material options include asphalt architectural shingles, metal standing seam, metal corrugated, and flat membrane systems. We help you choose based on your budget, aesthetic preference, and the specific demands of your Seattle climate.
Get a Free Quote →Metal Roofing
Metal roofing works on pitches as low as 3:12 for standing seam and as low as 1:12 with specific underlayment and sealant requirements. Steep pitches look incredible in metal. We help you choose the right panel profile, material, and color for your Seattle home.
Get a Free Quote →Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in Washington's weather.
Get a Free Quote →Flat Roofing
EPDM (rubber roofing) has a 50+ year track record as a flat roofing membrane. We install fully adhered EPDM with taped or glued seams over polyiso insulation. It's a great option for Seattle building owners who want proven performance at a lower cost than TPO or PVC.
Get a Free Quote →Commercial Roofing
TPO is our most-installed commercial membrane in Seattle. 60-mil thickness, hot-air welded seams, mechanically attached or fully adhered over polyiso insulation. The weld is stronger than the membrane. 15-20 year manufacturer warranties depending on system build-up.
Get a Free Quote →Gutter Installation
Half-round copper gutters with round downspouts are the premium install for historic and high-end homes in Seattle. We solder every joint on-site with 50/50 tin-lead solder. Copper weathers to a green patina in Washington's climate over 5-7 years. For modern aluminum installs, we use Spectra Metals .027 gauge seamless stock in 25+ color options with Raytec hidden hangers rated to 25 lbs per linear foot of combined debris and ice load.
Get a Free Quote →Roof Inspection
Our 27-point residential roof inspection: (1) shingle condition and granule loss, (2) nail pops, (3) lifting tabs, (4) ridge cap integrity, (5) valley flashing, (6) step flashing at walls, (7) chimney flashing and counter-flashing, (8) drip edge condition, (9) pipe boot seals, (10) plumbing and HVAC vent integrity, (11) ridge vent function, (12) soffit ventilation, (13) gutter pitch and capacity, (14) downspout drainage, (15) fascia condition, (16) soffit condition, (17) ice dam evidence, (18) moss or algae growth, (19-27) attic: decking moisture, insulation displacement, rafter condition, bathroom exhaust routing, daylight penetration, ventilation balance, mold indicators, pest intrusion, previous repair evidence. Written report with annotated photos emailed same day.
Get a Free Quote →Emergency Roof Repair
Fallen tree damage requires immediate structural assessment before tarping. If a tree has displaced rafters, cracked a ridge beam, or pushed through ceiling joists, the structure is compromised. We assess from both exterior and attic, coordinate with structural engineers or framing contractors when needed, and tarp only areas that are structurally stable enough to support the tarp hardware. Insurance claims for tree strikes require separate line items for tree removal, structural repair, and roofing repair. We document each scope independently.
Get a Free Quote →Skylight Installation
Skylight replacement on existing curbs: VELUX FCM curb-mount units install directly on the existing curb frame. No structural modification, no interior disruption. The FCM sits on the curb with a built-in sill pan and integrates with a new QCM flashing kit. Low-E4 laminated glass with argon fill provides R-value improvements over older skylights. Solar-powered blinds and venting available on VSS models. The 10-year No Leak Installation Warranty requires VELUX-certified installation with the complete flashing system. We're certified in Seattle.
Get a Free Quote →